Call Us : 0417 942 478

Home » Tile and Grout Cleaning » Tile & Stone Sealers – Impregnating or Surface

Tile & Stone Sealers – Impregnating or Surface


Understanding the difference between surface and impregnating sealers

Essentially there are two types of sealing products available on the market suitable for sealing natural stone wall and floor tiles.

Sealing illustration


Impregnating sealers are suspended in a liquid carrier which is either spirit or water based. This ensures that the sealer is absorbed into the tile just below the surface, sealing the small pin holes and open fissures. Once absorbed the carrier evaporates, leaving the sealer behind. General characteristics of impregnating sealers are that they give a natural matt or colour enhanced finish and are micro porous. Meaning they are breathable, moisture repellent and resistant to staining. Generally impregnating sealers are effective for interior and exterior use. This includes use in wet areas such as swimming pools and wet rooms.


In general these tend to be water based. They will give an alternative type of protection to the surface of natural stone wall and floor tiles. Depending upon the circumstances they are used on their own or with an impregnating sealer. It is practical to seal natural stone wall and floor tiles with either an impregnating or surface sealer, or sometimes both. There are a number of factors that will guide your choice.


These are:

  1. The type of finished look you want.
  2. The situation the tiles are used in.
  3. The level and type of traffic the surface will carry.
  4. Internal or external use.

Choosing your finish

There are three basic types of finish:

  1. Matt,
  2. Colour Enhanced Matt
  3. Gloss/Satin

Matt and Colour Enhanced Matt are achieved using impregnating sealers and will keep or enhance the natural appearance of the surface. If a polished or shiny surface finish is desired then a gloss or satin surface sealer should be used.

Lets us help you if your are not sure

Deciding which type of sealer you should use is a difficult choice.
Contact us on 0417 942 478 and we will be happy to help you.

Post Tagged with

Leave a Reply

Your email address will not be published. Required fields are marked *

19 + 13 =